Home > News > Content
Ceramic Jewelry Making Process
- Dec 28, 2018 -

01 Molding: The plaster model is an important aid in the production of ceramics. Both plastic and grouting methods are widely used as models. It has the characteristics of clear corners of the replica, the production process: the production of the mold, the mold master, the main mold, the casting mold.

02 Forming: Molding is to use the dry gypsum mold to make the required blanks into various blanks by various methods. Nowadays, the commonly used molding methods include plastic molding, grouting, dry pressing and isostatic pressing. method.

03 Repair: Ceramic handicrafts need to be modified or wiped according to the small repair batch after molding.

04 air dried: The drying of ceramic green body has experienced four stages of development: charcoal for fuel drying, anthracite for fuel heating and drying, and smokeless drying for boiler steam drying and kiln drying. - But ceramic trinkets are more naturally dried.

05 drawing: Purely hand-made ceramic jewellery, each piece of jewelry has a unique charm, each ceramic jewellery has a subtle difference, it is this difference brings unique aura and beauty to ceramic jewellery.

06 shelves: Ceramic crafts will adopt different rack-mounting methods according to different current conditions and process requirements; usually, the racking methods are: flat, string, and hanging.

07 firing: The firing temperature of ceramics is divided into three sections: high, medium and low: the high temperature porcelain firing temperature is above 1200 degrees, the medium temperature porcelain firing temperature is 1000-1150 degrees, and the low temperature porcelain firing temperature is 700-900 degrees; The products are all fired at high temperatures.


Copyright © Dongguan Zhichuan Precision Technology Co.,Ltd All Rights Reserved.